Products
MIT39.5-2 I-J HNG(2)2-1/2X9-1/2 (CASE/25)
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.
$14.49/EACH
$14.49/EACH
H2A TY-DOWN RAFTER TO STUD (CASE/100)
Hurricane Tie is made of 18-gauge galvanized steel for strength and durability.
$2.69/EACH
$2.69/EACH
$4.79/EACH
$4.79/EACH
$4.09/EACH
$4.09/EACH
HU7 LVL HANGER 1-13/16X6-11/16 (CASE/25)
HU—Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails.
$19.19/EACH
$19.19/EACH
$21.69/EACH
$21.69/EACH
IUS2.37/14 I-JST HNGR 2-1/4X14 (CASE/25)
IUS/MIU I-Joist Hangers The improved IUS is now fully compatible with shallow flange I-joists! I-joists with flange thicknesses between 1 1/8" and 1 1/2" achieve the full allowable table loads i
$8.49/EACH
$8.49/EACH
$3.99/EACH
$3.99/EACH
$7.09/EACH
$7.09/EACH
AC383 3" ADJ COLUMN 8'3"-8'7" ALLOW. LOAD 13,138
3"OD 11 gauge (0.120 wall). 4" adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint.
$169.99/EA
$169.99/EA
$6.29/EACH
$6.29/EACH
$2.19/EACH
$2.19/EACH
TP35 MENDING PLATE 5X3-1/8(CASE/100)
TPs are nail-on tie plates. TPAs are flanged for added support.
$1.69/EACH
$1.69/EACH
HGUS414 LVL/I-JOIST 3-1/2 X 14 (CASE/12)
All hangers in this series have double shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength.
$67.79/EACH
$67.79/EACH
$6.99/EACH
$6.99/EACH
MIU5.12/9 I-J HNG(2)2-1/2X9-1/2 (CASE/25)
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.
$24.09/EACH
$24.09/EACH
ITS1.81/11.88 I-J HN 1.75X11-7/8 (CASE/25)
A dedicated range of Top Flange I-joist hangers meeting the unique needs of I-joists while offering superior performance and ease of installation. ITS - The innovative ITS sets a new standard for e
$7.29/EACH
$7.29/EACH
$22.99/EACH
$22.99/EACH
IUS3.56/11.88 I-JS 3-5/8X11-7/8 (CASE/25)
IUS/MIU I-Joist Hangers The improved IUS is now fully compatible with shallow flange I-joists! I-joists with flange thicknesses between 1 1/8" and 1 1/2" achieve the full allowable table loads i