Products
Email Newsletter
Sign up to receive information about new products, events and industry news.
02905B 1/2 EMT 90 DEG EL CONN.
Zinc die cast. Rain-tight and concrete-tight. Indoor or outdoor applications. Use to connect E.M.T.
$2.99/EACH
$2.99/EACH
05103B 3/8" NM/SE CLAMP CONN
Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter.
$0.59/EACH
$0.59/EACH
101543 GLV EMT CONDT 1/2X10
High Grade Mild Strip Steel, Hot Galvanized With A Process That Combines Zinc, A Conversion Coating, And A Clear Organic Polymer Top-Coat To Form A Triple Layer Of Protection Against Corrosion And Abr
$3.79/EACH
$3.79/EACH
101550 GLV EMT CONDT 3/4X10
High Grade Mild Strip Steel, Hot Galvanized With A Process That Combines Zinc, A Conversion Coating, And A Clear Organic Polymer Top-Coat To Form A Triple Layer Of Protection Against Corrosion And Abr
$6.49/EACH
$6.49/EACH
12105B 1/2"EMT SET-SCREW CONN
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
$0.59/EACH
$0.59/EACH
12107B 3/4 EMT SET SCR CONNECTOR
Zinc die cast. Use to connect E.M.T. conduit to steel outlet box, load center or other metal enclosure. U.L. Approved.
$0.99/EACH
$0.99/EACH
12205B 1/2"EMT SET-SCREW COUPL
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
$0.69/EACH
$0.69/EACH
12207B 3/4"EMT SET-SCREW COUPL
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
$0.89/EACH
$0.89/EACH
14405 1/2" EMT PULL ELBOW
Zinc Die Cast. Removable Steel Cover Facilitates Wire Pulling. Use To Connect EMT Conduit Together At A 90 Degree Bend. Tray Box.
$3.49/EACH
$3.49/EACH
$1.99/EACH
$1.99/EACH
529 3X2.5 SWITCH BOX
Four Cable Knockouts (End). Two 1/2" Conduit Knockouts, (End). One 1/2" Conduit Knockout (Bottom). "LB" Bracket For Wood Studs, 5/8" Offset To Clear Narrow Door Molding.
$3.49/EACH
$3.49/EACH
61505B 1/2" EMT 1-HOLE STRAP
Secure EMT conduit to wood and masonry work with these Halex 1/2 in. EMT 1-Hole Straps (100-Pack).
$0.39/EACH
$0.39/EACH
61507B 3/4" EMT 1-HOLE STRAP
When load bearing is required, use these zinc-plated steel Halex 3/4 in. EMT 1-Hole Straps (100-Pack) to secure EMT conduit to surfaces such as wood and masonry.
$0.39/EACH
$0.39/EACH
64405 1/2"EMT 90D GLV STL ELBO
To Connect EMT Conduit Together To Allow For 90 Degree Bends. UL Approved.
$3.79/EACH
$3.79/EACH
$5.49/EA
$5.49/EA
807 2 DUP. 4IN. SQ. COVER
Exposed work cover. For two receptacles. Exposed work covers are used to mount switches or receptacles on boxes in surface mount applications. 6.5 cubic inch capacity. 1.406" diameter hole.
$1.99/EACH
$1.99/EACH
8192 4"SQ BX 1.5"DEEP
Conduit Wiring System. Installed In Ceilings Or Walls For Lighting Fixtures, Switches Or Receptacles.
$1.29/EACH
$1.29/EACH
8232 2-1/8D WELDED SQR BOX
Used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices; Installed in ceilings or walls for lighting fixtures, switches, or receptacle
$2.49/EACH
$2.49/EACH
864 DPLX HANDY BOX COVER
Raco Covers are crafted from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, and receptacles. All Raco steel covers are UL and CSA listed.
$0.69/EACH
$0.69/EACH
865 SNGL TOGGLE HANDY BX COVER
Raco Covers are crafted from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, and receptacles. All Raco steel covers are UL and CSA listed.
