Engineered to attach deck ledger boards to a wooden house structure with no predrilling. Stronger design shear values than 1/2" lags, IBC/IRC code compliant, Built-in washer head design eliminates need for addtional washers, three-step coating protects against corrosion in pressure treated wood. Driver bit included.
Save time, money, and labor costs. LedgerLOK is the first fastener engineered to attach deck ledger boards to the rim board of the house with no predrilling. No need to predrill and hand-ratchet in 1/2 inch galvanized lags and washers. LedgerLOK also has stronger shear values than 1/2 inch galvanized lag screws. Plus, with LedgerLOK's smaller shank diameter, even a cordless drill (14.4 volts or higher) zips them right in, saving on battery life and additional tooling costs. Each pack size contains a free 5/16 inch driver bit.
The Malco FCS Fiber Cement Siding Hand Snips are designed specifically for making precise arc and trim cuts in fiber cement siding. This tool is recommended for cutting 5/16" James Hardi and Certainteed Siding products. Shearing fiber cement products with this tool creates much less dust than sawing or drilling. Unique ergonomic design allows the user to operate the tool from the bottom of the material. This way lines and shapes can be marked on the finished side of the panel and easily be followed with the center blade of the tool, which is on the top of the panel.
For any concrete use requiring high early strength and rapid strength gains. QUIKRETE 5000 sets quickly, making it ideal for cold weather applications. It has a walk-on time of 10 - 12 hours. QUIKRETE 5000 can be used for any application requiring concrete in a minimum thickness of 2" (51 mm), such as slabs, footings, steps, columns, walls and patios.
FB fence brackets make the connection between fence rails and posts simple and strong. Eliminates the need for toe nailing or screwing. Clean, versatile connections make planning and building fences, deck/porch railings and louvers easier and faster.
Specifications
1-9/16"w x 3-3/8"h x 3/4"b
20 Gauge
Holes are sized for 8d x 1-1/2", 8d commons or #6 wood screws
Z-Max:Hot Dip Galvanized(G185) 1.85oz of zinc per sq-ft surface area per ASTM A653 total both sides