All hangers in this series have double shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation, and the use of all common nails for the same connection. 

• 4-9/16" Minimum Heel Height
• 18 Gauge
• 3-1/8"W x 4-7/8"H x 2"B
• Use with 16d Fasteners
• Z-Max:Hot Dip Galvanized(G185) 1.85oz of zinc per sq-ft surface area per ASTM A653 total both sides

• Double Shear Nailing for faster installation
• Install with common nails
• 18 gauge galvanized steel
• Install with four 10d nails in header; two 10d nails in joist

• G185
• 2'' x 10''
• Face Mount Joist Hanger Z-Max

• Patented double-shear nailing design provides greater strength with fewer nails
• Speed prongs for fast and easy installation
• Angled joist nailing easier in tight spaces
• Do not bend or remove tabs
• Fits Joist Sizes: Triple 2x10 and 2x12

• This hanger features patented double shear nailing, which distributes the load through 2 points on each joist nail for greater strength
• It also allows for the use of fewer nails, faster installation, and the use of common nails for all connections
• 18-gauge galvanized steel
• Some double shear joist hangers are available in ZMAX coating
• 3-1/8 W. x 9 H. x 2 base, use 8-16d nails on header and 6-16d nails on joist

Concealed flange hanger available for 2 by 6 lumber. Ideal for end of ledger/header or post conditions. Also provides cleaner lines for exposed conditions such as overhead decks. Value engineered for strength and economy as well as installation ease. 18 gauge galvanized ZMAX steel.

Concealed flange hanger available for 2 by 10 lumber. Ideal for end of ledger/header or post conditions. Also provides cleaner lines for exposed conditions such as overhead decks. Value engineered for strength and economy as well as installation ease. 12 gauge galvanized ZMAX steel.

• Z-MAX
• Triple Coated Zinc for Corrosion Resistance

Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties.

• 18 Gauge
• 1-1/4" x 36" Strap Tie
• Use with 10d Fasteners
• Zinc galvanized finish containing 0.90oz of zinc per square foot of surface area (total both sides)

Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties.

• 20 Gauge
• 1-1/4" x 24" Strap Tie
• Use with 10d Fasteners
• Zinc galvanized finish containing 0.90oz of zinc per square foot of surface area (total both sides)