Designed For Attaching Fiber Cement Backerboard To Wood Or Light Gauge, 26 - 20, Steel. No Pre Drilling Necessary. #2 Square Drive Prevent Bit From Slipping. Applications: Bathtub/Shower, Countertops, Floors, Sink Backsplash. Includes Square Drive Bit.
Use For Marking Concrete, Pavement, Gravel, Grass, And More. Use To Mark The Location Of Underground Utilities At Construction And Excavation Sites Where Identification Is Desired. Features A Precision-Line Spray Tip For Easy-To-Read, Bright, Vivid Markings. Can Be Applied Down To 25-Degree Fahrenhiet. Dries In Less Than 5 Minutes. Spray-Through Cap. Tip Keeps Paint Off Fingers. Use With Sku#826.4608. Can Be Used In USDA Facilities Based On FSIS Directive 11,000.4 (Rev. 1), November 24, 1995. Covers Approximately 600-700 Linear Feet At 1 In. Wide.
Blades Are 1 Inch Tall For Straight, Fast Cutting And With The Ability To Flex In Tight Cutting Situations. Heat Treating Process Extends The Life Of The Blades. The 18 Teeth Per Inch Blade Should Be Used On Material 1/8 Inch Through 3/16 Inch Thick. Applications: Demolition, Plumbing, Remodeling, General Metal Cutting, Cuts Pipe, Channels, Tubing, Angle Iron Up To 4 In., Nail Embedded Wood, & Steel.
Use The Countdown Timer With Lights Or Exhaust Fans To Reduce Moisture, Mold, And Mildew Growth In Bathrooms. Replace Standard Switch With The Maestro Eco-Timer And Never Accidentally Leave The Fan Or Lights On Again. The Timer Has A 1 To 30 Minute Countdown Range, Without An Always-On Option. The LEDs Move Lower Every Five Minutes, Indicating The Amount Of On Time Left. A One-Minute Warning Signals When The Fan Or Lights Are About To Turn Off. Controls A 3 Amp Fan Or Up To 600 W/VA (5 Amps) Of Incandescent/Halogen Or Magnetic Low-Voltage Lighting. No Neutral Wire Required. UL Listed.
For Use In The Home Or Shop. Made With Tough, Heat Resistant Sockets And Vented Aluminum Reflectors, Push-Through Switches, And Strong Double Swivel Clamps With Vinyl Grips. 5-1/2" Reflection Diameter. 60 Watt/125 Volt. UL Listed.
Non-Toxic, Solvent-Free, 1-Part, Cleans Up With Water. Safer To Use Than Traditional Waterproof Wood Glues, And Offers Superior Bond Strength. Provides Strong Initial Tack, Sands Easily Without Softening. Longer Open Assemble Time, Lower Application Temperature, Unaffected By Finishes. Passes ANSI/HPVA Type I Water-Resistance Specifications. FDA Approved For Indirect Food Contact, Such As Cutting Boards. Conforms To ASTM D-4236. 4000 PSI Bond Strength At Room Temperature On 57-Percent Wood Failure. 10-Min. Assembly Time After Application.
Premium Split Leather Palm, Index Finger, Finger Tips, Thumb, Pull And Knuckle Strap. Continuous Thumb Design. Striped Cotton Back With Rubberized Safety Cuff. Ideal For Metal Fabricating, Plant Maintenance, Lumber, Or Any Application Where Severe Wear Is Present.
